Quick Answer: How Do You Thread A Bobbin On A Brother Cs5055prw?

How do you get the bobbin thread up?

Raising the Bobbin ThreadEnsure that the power is switched off.Raise the needle to the highest point by turning the hand wheel slowly towards you.Raise the presser foot.Hold the needle thread.Turn the hand wheel slowly towards you to lower and raise the needle.Gently pull the needle thread to pull up the bobbin thread.Open the loop.More items….

Why is My Brother sewing machine not picking up bobbin thread?

– Your thread could be caught on something between the needle and your spool of thread if so, your thread will be too tight for the needle to pick up the bobbin thread. … – Make sure that the needle has been installed correctly. The flat side of the needle should be facing toward the back of the machine.

Why isn’t my bobbin thread coming up?

Also, make sure your bobbin is in correctly (not backwards) and that the upper tension disks of your machine are threaded correctly. Make sure the presser foot is up when seating the thread through the upper tension. … If the timing is out, the needle thread is not meeting the bobbin thread in time to form a stitch.

What is bobbin thread used for?

Bobbin thread is a lightweight thread for machine embroidery or machine basting. When bobbin thread is used for machine embroidery, it allows the back of the embroidery design to be much less dense than the front of the design. This is especially helpful when you are embroidering lightweight fabric.

Can you manually thread a bobbin?

With one hand, hold the drill (in a way that is comfortable and you are able to press the button). With your other hand, pull some thread from your skein or spool and wrap it a few times around your bobbin by hand to secure it in place.

What kind of thread do you use for a Brother sewing machine?

Thread designed specifically for Brother sewing machines is obviously the best, but there are other choices too. Embroidery thread, silk thread, and polyester thread are all good threads that will work with your Brother sewing machine.

How much thread do you put on a bobbin?

Unwind about 18″ or so of thread and bring it around the backside of the bobbin winder tension disc, wind it around the tension disc one time. Some machines might have a thread guide before this step- if yours does, don’t skip it! Be sure to place your thread through all the thread guides on your machine. 3.

What can I use instead of a bobbin?

There are machines that sew without a bobbin – they are called sergers, overlockers, chain stitch machines, and the thread for the underside of the fabric feeds off of a moving “looper” (a hinged hook with guides for the thread).

What to do if you dont have a bobbin?

You can’t sew without a bobbin, as the machine requires two spools in order to operate properly. Therefore, you will need to add the bobbin thread in addition to your needle thread.

Why is my bobbin thread bunching up?

There are several culprits for this ranging from a dull needle, improper threading or tension. The tension in both your upper and bobbin threads need to be even. The bobbin could also be placed incorrectly. More than likely, you forgot to put the bobbin back correctly while cleaning your machine.